Dodge Off Road (DOR) builds steering, track bars, long arms and suspension for Ram trucks. It does not make Jeep bolt-on kits, and we will not pretend otherwise. Here is what genuinely applies, based only on what DOR’s own product pages say.
The honest version
This site is a Jeep buyer’s and build-planning guide written by people from the DOR crew. Linking to the store is how the work is paid for. It is not a reason to list a Ram track bar as if it fits a JK. If a DOR product page does not list your Jeep, it is not a listed fit. Ask DOR before you buy, and do not modify a DOR product without talking to them first: their install guides say that voids the warranty.
What can apply to a Jeep build
1.5-inch hex tube adapter
DOR sells this as the same weld-in hex tube adapter it uses on its track bars, drag links and heavy-duty tie rods, offered on its own for other builds. The product page lists it as fitting 1.5-inch OD tube with a 1-inch ID, accepting a 7/8-14 heim, machined from 1018 steel, right- or left-hand thread, weld-in only, sold each. There is no vehicle fitment on the page, which is why it can be a raw fabrication part for a custom link. It is not a bolt-on Jeep part.
Dana 60 cover (only if the donor is a listed Ram axle)
3/8-inch steel, magnetic drain and fill plugs, 4.25 quarts, new hardware, powder-coated satin black or bare steel on request. DOR lists it for 1994–2002 Ram 2500/3500 4x4 Dana 60 fronts and for 2nd-gen 2500/3500 V8 trucks with a rear Dana 60. It is not listed for factory Jeep axles, and it is not listed for every Dana 60. If your swap donor is one of those Ram housings, this is the listed cover. If it is not, it is not a listed fit.


Replacement heim joint
DOR lists this as a replacement heim for its steering or track-bar kits, 7/8-14 shank, left- or right-hand thread, with an optional jam nut. That is a replacement part for DOR kits, not a listed Jeep part. If you are building a custom link with the hex adapter above, you still need to design, weld and inspect that work as a custom fabrication job.
Control-arm or long-arm joint
DOR lists this as a replacement or spare Johnny Joint for DOR adjustable long arms and short arms, ordered by year range and axle or frame side. Those arms are Ram products. This is not a listed Jeep control-arm joint.
Ram-only, but useful to read
Crossover steering kits
Listed for 1994–2012 Ram 2500/3500 4x4 and 1994–2001 Ram 1500 4x4 trucks. They are not Jeep kits. The product pages are a clear look at why a shop might move a solid-axle truck to a crossover layout, which is a conversation some custom Jeep axle builds also have, with completely different parts.
Install guides
DOR publishes its install guides as free PDFs. They are written for Rams. They show how a solid-axle steering or long-arm install is sequenced, inspected and aligned. They are not instructions for a Wrangler.

Own a Ram too?
Plenty of Jeep owners also have a Ram in the driveway. For Ram 2500/3500 and Power Wagon trucks, DOR’s steering, track bar and long arm sections are where its core products live.
Where this comes from
- Dodge Off Road: 1.5-inch hex tube adapter
- Dodge Off Road: Dana 60 differential cover
- Dodge Off Road: Replacement heim joint
- Dodge Off Road: Control arm or long arm joint
- Dodge Off Road: Crossover steering kit
- Dodge Off Road: Extreme-duty crossover steering kit
- Dodge Off Road: Install guides
Last reviewed 2026-11-10. General information only: the vehicle maker’s and your parts maker’s instructions come first.